LinkedIn →

Why IVD Manufacturers Can’t Find a Senior Automation Engineer (and What to Do About It)

RB
MEPSCo GAMP · Last updated:
Automated capital equipment assembly station with a component nest array in a medical device cleanroom

Finding a senior automation engineer for medical device manufacturing is harder than it looks on paper. The role requires both equipment engineering depth and GAMP documentation fluency — a combination that’s genuinely scarce. Most engineers with the automation side lack the regulated-environment experience. Most with the validation side lack the capital equipment side. If you’ve been searching for 60-plus days without a qualified candidate, you’re not alone.

KEY TAKEAWAYS
  • The role needs two skill sets that rarely overlap: capital equipment engineering depth and GAMP documentation fluency.
  • General engineering roles take 49–62 days to fill; the GAMP-qualified tier runs longer, often a 90-day search.
  • A full-time senior automation engineer runs $130K–$162K in base salary, and 1–3 capital projects a year rarely fill a 40-hour week.
  • For 1–3 installations a year, a fractional automation engineer usually costs 40%–60% less and skips the recruiting timeline entirely.

The job description looks reasonable. “Senior automation engineer, 5–8 years, medical device experience preferred, GAMP knowledge a plus.” You post it and wait.

Sixty days later you have 40 applicants. Maybe four of them have both the automation engineering depth and any real understanding of what IQ/OQ/PQ documentation requires in a regulated manufacturing environment. Two of those won’t relocate. One wants a number you can’t hit.

That’s not a recruiting failure. That’s the market.

The Two Skills That Almost Never Overlap

Automation engineering and GAMP validation expertise are two different career tracks that happen to need each other on a capital equipment project.

Most automation engineers come up through machine building, PLC programming, or process equipment design. They know how to spec equipment and run a FAT. But GAMP documentation — the CRD, URS, FRS, IQ/OQ/PQ protocol stack — is a regulated-environment skill set they’ve often never needed to develop. Their vendors handled it. Or quality did. Or it just didn’t come up.

Validation engineers come from the opposite direction. They understand FDA expectations, know how to write a qualification protocol, and can read a URS. What many of them can’t do is evaluate whether the vendor’s proposed design actually meets the URS — because they’ve never been on the equipment side.

The person you need can do both. That person exists, but they’re not posting their resume on LinkedIn.

NACE data from 2023 showed 77% of employers already struggled to recruit qualified engineering candidates across manufacturing. In regulated industries, the problem is steeper. CPS4Jobs, Sept 2025 pegs average time to fill engineering positions at 49–62 days — and that’s across all engineering disciplines, not specifically the GAMP-qualified tier you need.

Why the Regulated Environment Makes It Harder

A general automation engineer who has spent a career in automotive or food manufacturing can learn GAMP. They can learn what documentation FDA expects. But that learning takes time, it takes a few projects, and it takes working alongside someone who already knows what they’re doing.

What that means in practice: a candidate with strong automation engineering credentials but no regulated environment experience is going to have a steep ramp. You’ll spend 6–12 months waiting for them to develop the documentation discipline that a senior life sciences automation engineer already has. Meanwhile your equipment project is on hold.

This is what 44 International flagged in their 2026 analysis of US medical device manufacturing: automation “raises the skill bar rather than lowering it” — you need skilled engineers who can work in the regulated environment, not just engineers who can run equipment.

The candidates who have both the equipment side and the documentation side are senior, experienced, and almost universally employed. The 44 International piece also notes that roughly 27% of manufacturing engineers are over 55. That demographic is the cohort with the most GAMP-era experience. They’re retiring, not refilling.

A gowned automation engineer operating an automated benchtop dispensing station in a medical device cleanroom

What Most IVD Manufacturers Actually Need (vs. What They’re Hiring For)

Here’s a pattern that repeats.

A consumable diagnostic company or IVD manufacturer has a fill line procurement coming up. Maybe it’s their second or third capital equipment project. They know they need engineering support — someone to write the URS, manage the vendor, attend the FAT, and run the IQ/OQ/PQ. So they open a full-time senior automation engineer req.

The problem is that the workload doesn’t support a full-time hire. A single fill line installation, from CRD to validated production, typically runs 4–9 months of elapsed project time — but not 40 hours a week. There are active phases and waiting periods. The URS takes three or four weeks of focused work. The FAT is a few days at the vendor’s site. IQ/OQ/PQ runs in defined sprints.

So you hire someone full-time, you pay $130K–$162K in base salary (per the KORE1 2026 Automation Engineer Salary Guide), and for stretches of that first year, they’re doing work that could be handled by someone else while you wait for the equipment to arrive or the vendor to respond.

The recruiting problem isn’t just supply. It’s also that the job as structured doesn’t make efficient use of what you’re paying for.

Stainless automation equipment control panel and HMI touchscreen on a medical device manufacturing line

The Fractional Model Solves the Recruiting Problem and the Utilization Problem

A fractional automation engineer engages on a project basis — scoped to the phases where you actually need senior engineering depth. CRD and URS development. Vendor evaluation and RFQ. FAT attendance and protocol execution. IQ/OQ/PQ. SOP development. You pay for the active project work. You don’t carry the bench time.

For IVD manufacturers and consumable diagnostic companies running 1–3 capital equipment installations per year, the fractional model typically costs 40%–60% less than a full-time senior automation engineer hire — and you sidestep the 49–62 day average recruiting timeline entirely.

More relevant: you don’t need to find that rare dual-track engineer on the open market and convince them to join your company full-time. The fractional model gives you access to someone who already has 25+ years of this specific work, without the recruitment risk, ramp-up time, or carrying cost between projects.

MEPSCo GAMP has completed 96+ capital equipment installations for IVD manufacturers, consumable diagnostic companies, and medical diagnostic CDMOs. Every engagement is manufacturer-side only — no vendor relationships that create bias, no validation-only scope that leaves the equipment specification to someone else.

When a Full-Time Hire Actually Makes Sense

There are situations where a full-time senior automation engineer is the right answer.

If you’re running 5+ capital equipment installations per year, the workload probably justifies it. If you have an internal quality engineering team that can absorb the GAMP documentation work and you just need the equipment side covered, you may be able to hire a narrower skill set at a lower compensation level. If you’re a CDMO with multiple simultaneous client lines and you need dedicated equipment engineering capacity, the math on fractional doesn’t hold.

The fractional model is built for the company that has real capital equipment projects — not toy installs — but not enough of them to justify carrying a full-time senior engineering resource year-round.

The open role isn’t the only answer. If you have a capital equipment project coming up and can’t find the senior automation engineer you need on the timeline you have, schedule a project review with MEPSCo GAMP — we’ll scope what the engagement looks like and whether the fractional model fits your situation.

Common Questions on Automation Engineer Hiring for Medical Device Manufacturers

Why is it so hard to find a senior automation engineer with GAMP experience?

The automation side and the GAMP documentation side are two different career tracks. Most automation engineers don’t work in regulated environments, so they’ve never built the FDA documentation discipline. Most validation engineers haven’t spent time on the capital equipment side. The person who can do both is senior, experienced, and almost always employed. That’s what makes the open market search slow and expensive.

How long does it typically take to hire a senior automation engineer in medical device?

General engineering time-to-fill benchmarks run 49–62 days for a standard search. For a GAMP-qualified senior automation engineer with IVD or consumable diagnostic manufacturing experience, you’re likely at the longer end of that range — and the candidate pool at the top is narrow. A 90-day search with a handful of qualified candidates is not unusual.

What’s the difference between hiring a validation engineer and an automation engineer for a capital equipment project?

A validation engineer understands the qualification protocol structure — IQ/OQ/PQ, what FDA expects in a deviation record, how to write a test script. An automation engineer understands whether the equipment can actually do what the URS says it should do and how to hold the vendor accountable during FAT. For a capital equipment installation, you need both. The best outcome is one person who covers both sides — or a fractional automation engineer who works across the full procurement-to-qualification scope.

Can we use a staffing agency to find a GAMP-qualified automation engineer?

You can, and some specialized life sciences staffing firms have relevant candidates. The challenge is that a contract placement through a staffing agency still requires the engineer to ramp into your project context, your equipment type, and your quality system. You’re also paying agency markup on top of market rate. For a project-based engagement, a fractional automation engineer scoped to the actual project phases is often more efficient than a staffed contract because the scope is defined by deliverables, not calendar time.

What happens if we can’t fill the automation engineer role before the equipment arrives?

The equipment arriving without a qualified engineer on your side is a common version of this problem. What typically happens: the vendor manages the installation to their standard, the qualification protocols get written after the fact, and your IQ/OQ/PQ ends up documenting what the equipment does rather than confirming it meets your original requirements. That’s a documentation gap that’s expensive to fix — and visible in an FDA audit. Getting engineering support on scope before the equipment ships is significantly cheaper than correcting the qualification record after.

Related reading

The Bottom Line

If you run fewer than five capital equipment installations a year, the hardest part isn’t the hire — it’s that the hire doesn’t exist in the numbers you need, when you need it. A fractional automation engineer gives you the dual-track depth without the search.

You get someone who already owns the equipment side and the GAMP documentation side, scoped to the phases where it matters — URS through IQ/OQ/PQ close-out — without the 49–62 day recruiting timeline or the carrying cost between projects.

Reza Bashar at MEPSCo GAMP works with IVD and medical device manufacturers on equipment procurement and GAMP qualification. If you can’t find the senior automation engineer you need for your next capital project, reach out directly.